1. Thickness : 0.4~20.0mm
2. S.P.M. : 0~120 Strokes Per minute
Products: This machine is suitable for the market which
needs various patterns. The easy-changing punch dies can save a lot of time
when on change mould. Also, saving much investment on different moulds, if
you required large range on material thickness. The perforated metal m/c is
your best choice.
Perforated mesh is a
product that has been widely used in various areas, including construction,
remodeling, air filter on the ceiling, isolation, kitchen utensils, stereo
system and lawn furniture.
Fully (Semi) Automatic Net Making Machine
/ Semi-Automatic Perforated Metal Making Machine (Throat Type) Wind of
The body is made by adopting with
strong steel plate and is assembled in welding. It can bear great impact after
being absorbed by stress. So it will not deformed forever.
Finished Product Size: 4*8 feet
/ 4*10 feet / 5*10 feet
Suitable Material: Stainless Steel,
Hot Rolled Black Steel, Aluminum....Special Material is WELCOME.
Minimum Punching Hole Diameter:
The Main Bearing and Connecting
Bearing have been coated with PHOSPHOR BRONZE which will increase the wear
feature of machine as driving with high speed.
Punching Ability: 150~200 Ton
Automatic filling lubrication
Automatic process from feeding to
This machine is suitable for the market which needs various
patterns. The easy-changing punch dies can save a lot of time when on
changing mould. Also, saving much investment on different moulds, if you
required large range on material thickness. The perforated metal machine is your
Building, Machine, Plywood, Coal Tar, Electron, Glassware, Heat
Treatment, Leather, Plastic flowers, Earthenware/Pottery/Crockery, Cast Iron,
Printing Skill, Nicotine Weed/Tobacco, Rubber, Chemical, Mineral, Paper
Industry, Pharmacy, Metal Industry, Ceramics, Bottle Industry, Cement,
Grocery Industry and others.....
Checkered Plate (5 claws) / Checkered Plate (Rice Pattern)
Perforated Metal Making Machines (Plano Type)
Model: CF-7500 CF-10000 CF-12500
Automatic Perforated Metal Making
Machines (Plano Type) Plano-type automatic perforated metal
making machine, produce various kinds of machinery of
the perforated metal net.
1. Steel coil thickness: 0.5~2.0mm Max.
2. Steel coil width: 1,250mm Max.
3. Perforated net hole diameter: Diameter 2.0~10.0mm.
4. Working space required: about 3M X 7M.
5. Applicable material: various kinds of metal sheets.
6. Motor: 20~30Hp.
7. Voltage: 220/380/420.
8. S.P.M: 60~150/Min.
9. Thickness : 0.4~3.0mm
10. S.P.M : 0~200