-One machine can make two width and two thickness
sheet with punching.
-Plate thickness : 1.2-1.5 MM
-Incorporate holes on both sides of the blades just
before cutting to the required length
-Raw material : Galvanized steel
-Producing process : coil →Roll forming →Punching
→Automatic hydraulic cut-off after forming →
Finished products.
-
For the Volume Control Dampers.
curtain fire damper blade roll forming machine
Features:
Forming speed:18
M / minute.
Forming
thickness :1.0 mm. G.I.
Fire Damper Blade Roll
Forming Machine Standard Roll Forming Machine for
make Fire Damper Blade
Video:
Cold Roll
forming Machines, Forming Machines roll forming machine, fire damper roll
forming machine, cold
roll forming machine, Roll Forming, steel roll forming machine, wholesale Fire Damper
Roll Forming Machine, Fire Damper Roll Forming Machine suppliers, Fire
Damper Roll Forming Machine factory Cold Roll
forming Machines, Forming Machines, damper,damper hvac,fire damper fireplace
damper,fire smoke damper,fire damper duct,fire dampers for ductwork,vcd
damper,vcd volume control damper,volume control damper, volume control damper handle,volume control
damper design,motorized volume control damper,manual volume control
damper,circular volume control damper,round volume control damper,VCD,Volume
Control Damper,NRD,Non Return Damper,HVAC,Heating,Ventilation and Air
Conditioning,Curtain Fire Damper,Multi-Blade Fire Damper,Smoke
Damper(Airfoil Blade,VEE GROOVE BLADE,round),Fire Smoke Damper,VCD
Damper frame Making Machine,fire damper blade roll forming machine
